Mounting Accessories

This 2" Round Light Grommet is meant for the 2" LED OR incandescent lights. The upper half of the grommet will sit flush on the trailer's surface, protruding approximately 1/4 of an inch and the other half will sit below. Scroll down to see...

This 2 1/2" Round Light Grommet is meant for the 2 1/2" LED OR incandescent lights. The upper half of the grommet will sit flush on the trailer's surface, protruding approximately 1/4 of an inch and the other half will sit below. Scroll down to see...

This 6" Oval Light Grommet is meant for the 6" LED OR incandescent lights. The upper half of the grommet will sit flush on the trailer's surface, protruding approximately 1/4 of an inch and the other half will sit below. Scroll down to see compatible...

Base for 2 Bulb Snap Lock. This snap lock contains two prong insets compatible with the large snap lock lights. The ground connection is established when the snap lock is screwed into the trailer. Just connect the power wire and it is ready for action!...

Snap Lock Mounting Grommet. Scroll down to see compatible lights. Item #: LM2008GOM Mounting Grommet for Trailer Lights

This Trailer Licence Plate Bracket includes a Light and a 5 Inch Lead power wire (to be connected into your trailers power source). This Unit will Ground itself when attached to a metal component on the trailer.   Connection Type: Single 12V...

This Trailer License plate bracket includes a light and wire harness. The wire harness is 116" White & 84" Brown length and on the ends of the wires are 2 male barrel connectors (One is ground, the other is a power wire).The RecStuff line of...

This 4" Round Light Grommet is meant for the 4" LED OR incandescent lights. The upper half of the grommet will sit flush on the trailer's surface, protruding approximately 1/4 of an inch and the other half will sit below. Scroll down to see compatible...

This base is for the single bulb Incandescent Snap Lock trailer lights. The ground connection is established with a small connection from the light to the mounting screw hole. Scroll down to see compatible lights.   NOT COMPATIBLE WITH LED LIGHTS ...

The RecStuff line of incandescent trailer lights provide a low cost option for your trailer lighting needs. Whether you're replacing lights on your trailer or installing them for the first time, incandescent trailer lights are the traditional choice...

Chrome Base for 2 Bulb Snap Lock Lights. This snap lock contains two prong insets compatible with the large snap lock lights. The ground connection is established when the snap lock is screwed into the trailer. Just connect the power wire and it is...

This Trailer License plate bracket includes a light and wire harness. The wire harness is 84" long and on the ends of the wires are 2 male barrel connectors (One is ground, the other is a power wire).The RecStuff line of incandescent trailer lights...