Browse Categories
Browse by Manufacturer

LED Trailer Lights

Trailer Wheels

FREE High Pressure Valve Stems are included with every trailer wheel; steel and aluminum. *Unless otherwise noted* Trailer Wheels

Narrow Your Search:

8 In Galvanized, Silver, White
10 In Galvanized, Silver, White
12 In Aluminum, Galvanized, Silver, White
13 In Aluminum, Chrome, Galvanized, Silver, White
14 In Aluminum, Chrome, Galvanized, Silver, White
15 In Aluminum, Chrome, Galvanized, Silver, White
16 In Aluminum, Silver, White
17.5 In Aluminum
20 Inch Aluminum Airstream Wheels Free Trailer Tire and Wheel Mounting

Huge selection of trailer wheels available in aluminum, galvanized steel, painted and chrome finished rims in sizes ranging from 8 inch to 20 inch.

When shopping for a trailer rim, you should keep the following information in mind to ensure you are choosing the right wheel.

Trailer Rim Diameter

The Diameter of your rim is measured from bead to bead across the face of the rim, not the total diameter from lip to lip. This is a common mistake when measuring wheels; the distance measured by the total diameter of the wheel can be as much as an inch larger than the measurement from bead to bead. This results in ordering a wheel that is one inch too large for your application. The diameter of the rim is displayed as the first number in a wheel description. Example: 12x4. The number ‘12’ is the diameter, and ‘4’ is the width of the wheel.

Trailer Rim Width

The width of your wheel is measured from bead to bead and is also commonly measured incorrectly. Improper measurement of the width could result in poor fitment under your trailer and may rub or not fit at all. The width of the wheel is displayed as the second number in a wheel description. Example: 15x6. The number ‘15’ is the diameter, and the ‘6’ is the width of the wheel.

Here is a diagram on how to measure a trailer wheel to ensure an accurate measurements.

What is wheel Offset?

Offset is also commonly measured as back spacing or rear spacing, but it actually measures the distance between the wheel’s mounting pad and the centerline of the rim. When the mounting pad directly aligns with the wheels center, it has a ZERO offset. If the mounting pad is closer to the back side of the wheel, it is known as a NEGATIVE offset. When the mounting pad is closer to the face or street side of the rim, it is known as a POSITIVE offset.

How to Measure Offset

The easiest way to measure the offset of a wheel is to lay it face down on a flat surface. Now, lay anything with an absolute straight edge across the back of the wheel and measure the distance from the mounting pad, to the straight edge. Then flip the wheel over, measure again from the mounting surface to the straight edge (this time on the face of the wheel) and record that measurement. The difference between the two measurements is your offset.

Measuring your Bolt Pattern

There are many different bolt patterns in the trailer industry. For bolt patterns with an EVEN amount of bolt holes, measure from the center of one hole, to the center of the hole directly across from it. For 5 lug rims, measure from the outside most edge of a bolt hole, skip a hole, to the center of the next hole.

5 bolt patterns can also be verified by measuring the distance between the center of one bolt hole, the center of the bolt hole next to it. See measurements below:

  • 2 5/8" - your bolt pattern is 5 on 4.5"
  • 2 3/4" - your bolt pattern is 5 on 4.75"
  • 3" - your bolt pattern is 5 on 5"
  • 3 1/4" - your bolt pattern is 5 on 5.5"

Trailer Rim Center Bore

Most automotive wheels are Hub Centric – they rely on the center hub of the wheel to carry the weight. All trailer wheels are designed to support the weight of the trailer on the lug studs. Therefore, all of our wheels are lug-centric. With that being said, all of our wheels will work for your application as long as the center bore is equal to or greater than the diameter of your hub and the bolt pattern matches.

Bead Profile/Contour

If you study a wheel closely, you may notice a letter (J,JJ,k, etc.) stamped along with your rim dimensions. This simply designates the bead contour or bead profile of your rim. In other words, it is the area that the tire bead and the wheel meet. Most trailer wheels have standard bead profiles. When choosing a replacement trailer wheel, this is typically not a point of concern. - Email Support - Trailer Tire Sizing - Phone Support

Crazy Awesome Trailer Tire Sale
Fill Your Trailer Tires with Nitrogen